|
ALTERNATING CURRENT
Electrical current
that reverses its direction (negative to positive) periodically.
|
|
INTERMITTENT DUTY
A device that is
designed to operate for a short period of time; generally less that
45 seconds
|
|
|
CONTINUOUS DUTY
A device that is
designed to operate continuously without rest.
|
|
NORMALLY OPEN
Thte position of
a contact before it is energized; (open) Example: A switch is not
depressed that the circuit is complete.
|
|
|
DECIBEL (dB)
Measurement on
sound energy usually compared to the amount of sound the human ear
can detect.
|
|
NORMALLY CLOSED
The position of
a contact before it is energized; (closed) Example: A switch is
not depressed and the circuit is complete.
|
|
|
FAIL SAFE
A device that is
normally open and locks when power is applied to the unit. Example:
During a loss of power the device remains open.
|
|
OHMS
The measure of
resistance of an electrical device to resist the flow of energy.
|
|
|
FAIL SECURE
A device that is
normally closed or locked until power is applied. Example: During
a loss of power the device remains locked.
|
|
RECTIFIER
A device that is comonly used to convert AC to DC. Commonly used
to silence the audible sound that an electrical strike can make
while energized on AC current
|
|
|
FUSE
A device that is
placed in the path of energy that will break the circuit if the
current becomes too great. This is accomplished by having a strip
or metal that will melt when the currect exceeds the required amount.
|
|
RELAY
An electro-magnetic
device activated by a variation in conditions in one electric circuit
and controlling a larger current or actuating other devices in the
same or another electric circuit.
|
|
|
STANDARD VOLTAGE
Electric door strike
supplied with magnetic coils: 4-6FDC/8-16VAC. Electric door strikes
supplied with a solenoid coil: 6-10VDC, 10-16VAC: other voltages
available (See Electrical Characteristics Chart).
|
|
VOLT
A unit of electric
potential equial to the difference of electric potential between
two points that have a resistance of one ohm and through which a
current of one ampere is flowing.
|
|
|
WATT
The power developed
in a circuit by a current of one ampere flowing through a potential
difference of one volt.
|
|
|
|